MT2S thyristor AC voltage regulator

input

major loop power

≤AC500V,45~65Hz

control power

A:AC380V    B:AC220V     C:AC110V      T: Special power control need the major loop power as the same phase

fan power

AC220V,50/60Hz, lees than 75A the voltage regulator no fan

output

output voltage

major loop input voltage 0-95%

output current

see the mark

output methods

opt the constant voltage, constant current and constant power

load characteristics

 resistiveness and Inductive

Control prtection

control signal

dial switch

DC4-20mA input impedance:100Ω

DC0-10V input impedance:≥20KΩ

 Manual Given

DC0-5V

Internal given

given by the potentiometer on the control panel

ramp up or down

1-10s output ramp up or down the time adjustment range 1-10s

soft and hard shut off

dial switch to opt the soft or hard shut off.

current limiting characteristics

automatic limit the current in the rate.

Transmitting Output

current, voltage and power DC0-10V Transmitting Output (opt one)

Error reset

offer the error rest terminal (over current and overheating)

overcurrent protection

current≥twice rate current shut off the output start to Alarm

SCR overheating protection

SCR temperature ≥75°C shut off the output start to alarm

Working environment

shake

<0.5Gno shake.

protection grade

IP00

Altitude

more than 1000m, please derating use by GB/T3859.2-93

temperature

-10 - +45°C

humidity

20%~90%RH  NO WATER

 setup

wall-mounted

The vertical put, and ventilation